background image

®

PASCO AirLink

®

PS-3200

4

013-14636C

connectors depending on whether they are digital or 
analog.

Use the PS-2158 PASPORT Analog Adapter to connect a 
ScienceWorkshop analog sensor or sensor plug to the 
AirLink. 

Use the PS-2159 PASPORT Digital Adapter to connect a 
ScienceWorkshop digital sensor to the AirLink.

About the Battery

The PASCO AirLink's battery is partially charged at the 
factory. If the battery status LED blinks red, use the micro 
USB cable to connect the AirLink to a USB port or a USB 
charger.

Battery Usage

Battery life is very important to making the sensor simple 
and always ready to use, so all of the PASCO wireless 
products are designed for long battery life. For example, 
the AirLink turns itself off after a few minutes of inactivity to 
conserve battery life.. 

The battery life of the AirLink varies depending on the 
power demand of the connected sensor and the sampling 
rate. The battery life between charges ranges between 11 
hours for high power sensors to more than 70 hours for low 
power sensors, with continuous sampling at a rate of one 
sample per second. 

In typical classroom/lab use, this would translate to a bat-
tery life between charges ranging from one to four weeks or 
more, because full-day continuous sampling at this sam-
pling rate would be unusual. Even in the most extreme 

case with a high power sensor, AirLink would support of full 
day of use before needing to recharge. 

Maximizing Battery Life

Two factors that affect battery life are the storage tempera-
ture and the number of charge cycles. Therefore, avoid 
storing the AirLink in very cold or very hot environments. 
Because of the long battery usage time for the AirLink, the 
number of charge cycles is reduced, which lengthens bat-
tery life. 

Troubleshooting the PASCO AirLink

If the PASCO AirLink loses Bluetooth connection and 
will not reconnect, try cycling the ON button. Press and 
briefly 

hold

 the button until the status LEDs blink in 

sequence, and then release the button. Start the 
AirLink in the usual way.

If the AirLink stops communicating with the computer 
software or tablet application, try restarting the 
software or application. If the problem remains, press 
and 

hold

 the ON button for 10 seconds and then 

release. Start the AirLink in the usual way.

Turn Bluetooth off and then turn it back on. Restart the 
AirLink.

Technical Support

For assistance with any PASCO product, contact PASCO 
at:

The Reference Guide will be updated periodically. For the 
latest revision of this Reference Guide, visit the PASCO 
Web site at

www.pasco.com/manuals/

Enter the product number, PS-3200, in the text window.

Replacement Parts

For information about possible replacement parts, contact 
Technical Support:

USB Cable, Micro-to-USB A

ScienceWorkshop 

Analog Sensor Plug

ScienceWorkshop 

Digital Sensor Plug

ScienceWorkshop 

Analog Sensor

PS-2159 Digital 

Adapter

PS-2158 Analog 

Adapter

Address: PASCO scientific

10101 Foothills Blvd.
Roseville, CA 95747-7100

Phone:

+1 916 462 8384 (worldwide)
800-772-8700 (U.S.)

Web:

www.pasco.com

Email:

[email protected]

Отзывы: