www.parweld.com
www.parweld.com
5
the hidden side.
Do not weld on closed containers such as tanks, drums, or pipes,
unless they are properly prepared according to local regulations
Connect work cable to the work as close to the welding area as
practical to prevent welding current from travelling along, possibly
unknown paths and causing electric shock, sparks, and fire hazards.
Wear oil-free protective garments such as leather gloves, heavy
shirt, cuffless trousers, high shoes, and a cap. Remove any
combustibles, such as a butane lighter or matches, from your person
before doing any welding.
FlYInG Metal can injure eyes.
Welding, chipping, wire brushing, and grinding cause sparks and
flying metal. As welds cool they can throw off slag. Wear approved
safety glasses with side shields even under your welding helmet.
BuIlD up OF GaS can injure or kill.
Shut off shielding gas supply when not in use. Always ventilate
confined spaces or use approved air-supplied respirator.
HOt partS can cause severe burns.
Do not touch hot parts with bare hands.
Allow cooling period before working on gun or torch.
To handle hot parts, use proper tools and/or wear heavy, insulated
welding gloves and clothing to prevent burns.
MAGNETIC FIELDS can affect pacemakers.
Pacemaker wearers keep away.
Wearers should consult their doctor before going near arc welding,
gouging, or spot welding operations.
nOISe can damage hearing.
Noise from some processes or equipment can damage hearing.
Wear approved ear protection if noise level is high.
Shielding gas cylinders contain gas under high pressure.
CYLINDERS can explode if damaged.
Protect compressed gas cylinders from excessive heat, mechanical
shocks, physical damage, slag, open flames, sparks, and arcs.
Install cylinders in an upright position by securing to a stationary
support or cylinder rack to prevent falling or tipping. Keep cylinders
away from any welding or other electrical circuits. Never drape a
welding torch over a gas cylinder. Never allow a welding electrode to
touch any cylinder. Never weld on a pressurized cylinder - explosion
will result. Use only correct shielding gas cylinders, regulators,
hoses, and fittings designed for the specific application; maintain
them and associated parts in good condition.
Turn face away from valve outlet when opening cylinder valve.
Use the right equipment, correct procedures, and sufficient number
of persons to lift and move cylinders.
Read and follow instructions on compressed gas cylinders,
associated equipment, and Compressed Gas Association (CGA)
recommendations.
2.0 product Description
This water cooling unit is designed to be integrated
with MIG and TIG welding equipment to provide cooling for water
cooled torches up to a rating of 500A. In addition the unit may be
used on small spot welding or other similar equipment up to a rating
of 60KVA .The small footprint allows the unit to be mounted on the
cylinder stand of most welding machines.
3.0 technical
Specifications
Machine Model
XTS-904
XTS-905
Weight empty (kg)
19.5
19.5
Weight full (kg)
27.5
27.5
Tank capacity (litres)
8.0
8.0
Motor rating 230V (A)
1.3
1.3
Motor power (KW)
0.3
0.3
Motor Speed (rpm)
2800
2800
Pump max. pressure (Bar)
4
4
Pump max head (m)
45
45
Pump max. flow (lpm)
8
8
Heat exchanger rating (W)
900
900
Max. water temperature (
0
C)
60
60
Min. water temperature (
0
C)
4
4
Max ambient temperature (
0
C)
40
40
Noise (dba)
74
74
Sa
Fet
Y
Содержание XTS-904
Страница 1: ...Operator Manual ISSUE 1 XTS 904 XTS 905...
