Chapter 2 Operation
User Manual, MAR-5915-2x
User Manual
Page 20 of 40
MNL-0655-01 Rev A6
ECO-5592
05 Feb 19
Vertical Mounting
To install the DuraMAR5915-2X vertically on a mounting surface:
14. Create a hole pattern on the mounting surface that matches the pattern shown in Figure 3. The
mounting holes are 0.27” in diameter.
15. Attach the baseplate to the mounting surface using the four mounting holes. Attachment screws
should be 1/4-20.
Important!
Ensure that mounting screw length allows proper thread engagement of the mounting hardware.
Figure 3. Mounting Holes