PartySpace LIGHTHOUSE 2100, Руководство пользователя

Страница: 6 / 33

GROUND FIXING (IF WANTED)
1. Place the product in the desired location
(concrete surface recommended) in accordance
with the safety regulations and user guidelines.
Mark three points on the ground around the
heater as shown in diagram A. Remove the
product to proceed to the next step.
2. Drill a hole on each point as marked from step
one with an appropriate (concrete) drill. The
expansion bolt is 6 mm in diameter.
3. Place the product back in the desired location
and put the fixing clips (6) on the previously
drilled holes as shown in diagram B.
4. Tap the expansion bolts (B) into the pre-drilled
holes and tighten each bolt with a spanner.
LIGHTHOUSE 2100 | MANUAL