PartySpace bonbo, Руководство пользователя

Страница: 15 / 68

5. Lay the roof canvas over the frame. Pull the
nylon loops over the corners as indicated in
figure 4. On one of the corners there is a
drawstring to make it easier to pull the last
loop over the corner.
6. Place the pole so that the roof canvas is
placed under tension. Slide the peak of the
roof over the top of the pole and slide the
pole base over the uppermost cross cable
into the centre. Affix the pole with the
attachment clamp at the bottom.
7. Attach the loops with click connectors
around the roof frame to the inside of the
sloping sides of the roof canvas. This gives
the roof structure extra support.
8. Place two poles on one side beneath the frame so that the roof frame lies at an angle (see
figure 7a). Ensure that you tilt the frame evenly on both sides, so that the frame does not
become skewed. Ensure that the widening of the keder groove is at the top of the vertical
poles and that the keder grooves are fitted at an angle of 45° in relation to the corners of
the tent (figure 7b).
Figure 4
Figure 5
Figure 6
9. Place the two other poles in the same way and fit a base plate beneath each pole.
Figure 7a
Figure 7b
15 PAGODA MANUAL (WOODEN POLES) EN