Bartendro
TM
ShotBot
A
B
-4-
C
D
Step 1
Build Frame Legs
Press vertical leg (B) onto the square
fitting on the horizontal foot (A).
Orientation of the holes should be in-line
with the foot. Do this for both legs.
TIP: If the vertical leg is difficult to slide onto
the fitting, try flipping it upside-down and
resting it on a solid surface while using both
hands to push down on the foot.
Assembly Instructions
Step 2
Attach Faceplate
The protrusions from the faceplate
(C) will fit into the large holes in the
vertical legs.
Use the 8 screws (D) to attach the
faceplate to the legs.
Note: If you would like to accommodate
taller shot glasses, you can either cut the
spout so that it is shorter, or remove the
shelf where shot glasses rest and and re-
attach upside-down.
