manualshive.com logo in svg

Partner PT-5900, Руководство пользователя

Поделиться
Скачать
Partner PT-5900 Скачать руководство пользователя страница 40

34 

C H A P T E R   2   B I O S   S E T U P

Load Performance Setup Default (IDE/SATA)

This option opens a dialog box that lets you load performance defaults for all appropriate items in the Setup 

Utility. The IDE/SATA defaults place demands on the system that may be greater than the performance level 

of the components, and set the SATA mode to IDE/SATA.
Follow these instructions to load the defaults:
 

1.  From the Exit screen, scroll to Load Performance Setup Default (IDE/SATA).

 

2.  Press <Enter> to open the Load Performance Setup Default (IDE/SATA) screen.

 

3.  Select <Ok>.

 

4.  Press <Enter> to load the defaults.

Load Performance Setup Default AHCI mode

This option opens a dialog box that lets you load performance defaults for all appropriate items in the Setup 

Utility. The AHCI defaults place demands on the system that may be greater than the performance level of the 

components, and set the SATA mode to AHCI.
Follow these instructions to load the defaults:
 

1.  From the Exit screen, scroll to Load Performance Setup Default AHCI mode.

 

2.  Press <Enter> to open the Load Performance Setup Default AHCI mode screen.

 

3.  Select <Ok>.

 

4.  Press <Enter> to load the defaults.

Load Power Saving Setup Default

This option opens a dialog box that lets you load power saving defaults for all appropriate items in the Setup 

Utility. The power saving defaults place demands on the system and reduce power consumption.
Follow these instructions to load the defaults:
 

1.  From the Exit screen, scroll to Load Power Saving Setup Default.

 

2.  Press <Enter> to open the Load Power Saving Setup Default.

 

3.  Select <Ok>.

 

4.  Press <Enter> to load the defaults.

Содержание PT-5900



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды