70
Memory Hole At 15M–16M
This item is used to reserve memory space for ISA expansion cards that
require it. The default setting is Disabled.
Passive Release
When enabled the CPU to PCI bus access is allowed during passive
release. Otherwis e, only the PCI master access to local DRAM is
permitted. The default setting is Disabled.
Delayed Transaction
If the chipset has an embedded 32 -bit write buffer, to support delay
transaction cycles, you can enable this item to provide compliance with
PCI Ver. 2.1 specifications. We recommend that you leave this item at the
default setting. The default setting is Enabled.
AGP Aperture Size
This item defines the size of the aperture if you use an AGP graphics
adapter. The AGP aperture refers to a section of the PCI memory address
range used for graphics memory. We recommend that you leave this item
at the default setting. The default setting is 64.
Press <Esc> to return to the main screen.
P
P
o
o
w
w
e
e
r
r
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
S
S
e
e
t
t
u
u
p
p
O
O
p
p
t
t
i
i
o
o
n
n
This option enables you to control the system power management. This
mainboard supports ACPI (A dvanced Configuration and Power Interface).
The system has various power saving modes including powering down
the hard disk, turning off the video, suspending to RAM, and software
power down that allows the system to be automatically resumed by
certain events.
The power-saving modes can be controlled by timeouts. If the system is
inactive for a time, the timeouts begin counting. If the inactivity continues
so that the timeout period elapses, the system enters a power-saving mode.
If any item in the list of Reload Global Timer Events is Enabled, then any
activity on that item will reset the timeout counters to zero.
