Delay time = 3 * nn (ms), 1 <= nn <= 15
-extkb=<cc> Choose country code.
cc = US, UK, France, Germany, Spain, Italy
-modekey Enable the multi layer capability of the keyboard.
Available for 78 key keyboards only.
In this mode, the number one key (top left) is
designated as a mode key and is used to toggle
between three possible keyboard layouts. The
first level layout is the normal programmable
layout (except that key number one key is fixed
as the mode key). The other two levels have a
fixed layout; see sections 4.2 and 4.3 for
their configuration.
-program=<file> Program the keyboard with the layout in the
specified file. In this case, the utility
does not enter the interactive mode. For
example, if a keyboard layout had previously
saved in the file "feb1.cod" then that file
can be used to program the k78 cherry switch
keyboard by the command: k78C -program=feb1.cod
If not specified on command line then default settings are used
for above command switches.
Parameter Default Value if Unspecified
------------------------------------------------------------------
key repeat off
external keyboard on
key click on
delay 1 (3 milliseconds)
extkb US
After startup into interactive mode, the country code is shown
in the upper right corner of the screen.
2.3 Using the interactive mode.
The main screen of the program has a graphical depiction of
keyboard. Along the top of the screen are three categories of
commands: File, Edit, and Program. To access the file commands
enter an ALT-F, for edit commmands use ALT-E. ALT-P will write
your current keyboard configuration into the programmable keyboard
memory. After entering ALT-F or ALT-E to access the file and
edit menus you use the arrow keys to select your desired command.
Press the ENTER key when your desired command is highlighted.
When the program starts the configuration shown is a default one,
it is not necessarily the configuration of the programmable
keyboard at that time. Consequently, we suggest you save your
keyboard layouts in a file. If you do not save your layout to a
file, you will have to recreate it in every respect just to make
the smallest modification.
You will not need to use your programmable keyboard when
programming, it is much easier to use your auxiliary keyboard.
Yur programmable keyboard probably does not have all the letters,
function keys, arrow keys that you will want to use.
File SubMenu Commands, Shortcut key and desription:
-----------------------------------------------------
Open ALT-O
