manualshive.com logo in svg

Partner Tech International PT-6200, Руководство по обслуживанию, Страница: 24 / 70

Поделиться
Скачать
Partner Tech International PT-6200 Скачать руководство пользователя страница 24

16 

C H A P T E R   2   B I O S   S E T U P

► OnChip PCI Device

Use this item to enable or disable the PCI devices that are integrated on the mainboard. Select the item and 

press <Enter> to open the following menu:

VIA OnChip PCI 

Figure 3.8 

Device submenu

USB Controller

This item must be enabled to use the Universal Serial Bus ports on the mainboard. The default setting is 

Enabled.

USB 2.0 Controller

The USB 2.0 Controller item allows USB 2.0 functionality. The default setting is Enabled.

USB Keyboard Support

Enable this item if you plan to use a keyboard connected through the USB port in a legacy operating system 

(such as DOS) that does not support Plug and Play. The default setting is Enabled.

AC97 AUDIO

Enables and disables the onboard audio chip. Disable this item if you are going to install a PCI audio add-in 

card. The default setting is Auto.

Phoenix - AwardBIOS CMOS Setup Utility

OnChip PCI Device 

USB Controller             

[Enabled]

USB 2.0 Controller         

[Enabled]

USB Keyboard Support       

[Enabled]

AC97 AUDIO                 

[Auto]

Item Help

↑↓→←:Move  Enter:Select  +/-/PU/PD:Value  F10:Save ESC:Exit  F1:General Help

F5:Previous Values    F6:Fail-Safe Defaults    F7:Optimized Defaults

Содержание PT-6200







































































Отзывы:

Нет отзывов