Particle Measuring Systems HandiLaz Mini, Руководство оператора

Страница: 47 / 76

HandiLaz Mini Operator’s Manual Page B-1
Appendix B
Abbreviations and Definitions
Term Where Found Meaning
ADDRESS Screen ID of handheld unit (0–31); used to link to PC
AUTOST. Screen AUTOSTART:
Set Initial DELAY
Set Automatic start
AVG/AVE/
MEAN/M Screen,
Data Retrieval Software AVERAGE
B Screen BEEP enabled
CALC Screen, Printout CALCULATION Mode – Samples, then
Calculates AVG, SD, MAX, and MIN
CALCULATE? Iso Screen Calculate ISO results for samples taken so far
CONT Screen, Printout CONTINUOUS Mode – Samples continuously
until manually stopped.
CNT Screen, Printout COUNTS of particles
DELAY Screen DELAY before initial sample
E+2, E+5, etc. Screen, Printout Scientific Notation: E+5 means: multiply the
number to the left of “E” by 10 to the 5th power.
E= Screen, Printout ERROR =
F Screen, Printout Error: Low FLOW
L Screen, Printout Error: LASER
O Screen, Printout Error: OVER Max. Concentration
EDIT TIMES? Iso Screen Change number of samples at next location
END Screen Last record to be printed
ENTER
Screen, Key ENTER current command or parameter value