background image

 

1.2.2 Fueling instruction 

Fueling instructions

 

Recommended gasoline:   
Regular unleaded gasoline

If it is not 

available, then premium gasoline.

 

 
If knocking or pinging occurs, use a different brand of gasoline or premium unleaded fuel. If leaded 
gasoline is usually used, engine valves and related parts should be inspected after every 100 hours of 
operation.   
 

WARNING:

 

 

Do not smoke when refueling, and keep away from sparks, flames, or other sources of ignition. 

 

Stop engine before refueling. 

 

Refuel in a well-ventilated area; refuel portable fuel tanks off the boat. 

 

Do not overfill the fuel tank. 

 

Take care not to spill gasoline, if gasoline spills, wipe it up immediately. 

 

Tighten the filler cap securely after refueling. 

 

If you should swallow some gasoline, inhale gasoline vapor, or get gasoline in your eye, get 
immediate medical attention.   

 

If any gasoline spills onto your skin, immediately wash with soap and water. Change      clothing if 
gasoline spill s on it. 

 

Touch the fuel nozzle to metal components to prevent electrostatic sparks. 

 

 

Содержание F15BW














































































Отзывы: