Beagle Installation Instructions
Page 4 of 17
Step 2: Mount the router to the cover plate.
A.
If not already done, remove the cover plate from the enclosure.
B.
Align the router with the holes on the cover plate.
Ensure the router orientation is correct, as
shown in the images below.
C.
Fasten the router to the cover plate using the four PTA0368-B black flat head machine screws
provided in the kit, as shown in Figures 3 and 4.
D.
Guide the cable bundles back through the holes in the cover plate.
Figure 3: Fasten the router to the cover plate using PTA0368-B screws. (Beagle L)
Figure 4: Fasten the router to the cover plate using PTA0368-B screws. (Beagle G)
