background image

parsec-t.com

CAUTION 

To comply with FCC RF Exposure requirements in section 1.1310 

of the FCC Rules, antennas used with this device must be installed 

to provide a separation distance of at least 20 cm from all persons to 

satisfy RF exposure compliance.

DO NOT 
- Operate the transmitter when someone is within 24 inches of

   the antenna. 

- Install antenna or mast assembly on a windy day

- Install the mast close to power lines as it can cause serious injuries

  or death.

WARNING

This document gives the detailed instructions to install an antenna to 

the best of our knowledge. This document if for general information 

only. It cannot be used as a warranty. Parsec Technologies, Inc. will 

not accept any liability for any damage caused by an antenna due to 

unknown variables.

Make sure the fan cap covers are open while using the antenna.

Install the sim in router before mounting on to the router mount plate.

Warnings:

Step 7.

Step 8.

In the router, click on Status, Internet, and then Connections in the dropdown menu.  You should see options related to 

SIM cards installed.  Select the option with a cellular SIM. (Figure 19)

If all of the steps are completed, the antenna should be on and operating. Close the top cover plate using the thread 

forming screws provided in the kit. (Figure 20)

FIGURE 19

FIGURE 20

Содержание GOLDEN RETRIEVER













Отзывы: