Falcon Installation Instructions
Page 5 of 6
Table Mount
1.
Select the mounting location.
A.
To avoid de-tuning or interference issues, install the antenna as far
away as possible from other devices (minimum 24 inches), including
lights, AC units, routers, and other antennas.
B.
Find a suitable location with a high friction surface and out of the way
of accidental pushing or pulling of cables.
C.
A clear line of sight to the nearest cell tower is recommended for best
performance.
D.
Unfold the legs at the base of the antenna and place the antenna
upright.
Routing the Cable
1.
Properly route the cables, making sure there are no sharp
bends. Clamp the cables to the wall at about 6 inches
away from the antenna if the cables are being hung
straight from the wall.
2.
Make sure the antenna is mounted in the correct
direction and tighten the mounting hardware. Waterproof
the RF connectors using electrical tape, or a heat shrink
tube.
Cable Connection Instructions
Step 1:
Use canned air and/or isopropyl alcohol to clean all the connectors to ensure that there is no dust in the
terminals.
Step 2.
Connect the antenna cables to the designated terminals on the router, as shown in the tables and images
below:
S. No
Cable from Antenna
Connector on Router
1
CELL 1
MAIN0
2
CELL 2
AUX0 / DIV