INSTRUCTION REF: IN193
ISSUE No. 2
DATE 18.08.15
Page 6 of 12
www.parry.co.uk
FAULT FINDING
The most common fault is that the unit is not connected to the mains supply, and
so the mains lamp will not illuminate, in this circumstance please try the following
before calling for service assistance.
1.
Check the unit is plugged into the mains supply and the socket is switched
on.
2.
Check the fuse in the plug
3.
Try a different socket
4.
If the unit has been permanently connected to a fused switch ask a
qualified electrician or competent person to check the connections.
ONE OF THE ABOVE MAY CURE YOUR FAULT, IF NOT CONTACT YOUR
DISTRIBUTOR.
Your machine is fitted with a built in thermal cut-out, this will stop the element
from operating for a short time, if your machine has little or no water in it.
If both lamps are illuminated but it is not heating check that there is sufficient
water in the tank and try again, if it still does not heat up contact your distributor.
