INSTRUCTION REF: IN192
ISSUE No. 3
DATE 18.08.15
Page 7 of 13
www.parry.co.uk
11
Terminal Block
TB3POLLET
12
Heating Element
(Part of Motor Assembly No.4)
13
*Ducting
No Code
Mains Cable
MLEAD25
Cable Bush
BUSR06003
*All metalwork components
FAULT FINDING
The most common fault is that the unit is not connected to the mains supply, and
so the mains lamp will not illuminate, in this circumstance please try the following
before calling for service assistance.
1.
Check the unit is plugged into the mains supply and the socket is switched
on.
2.
Check the fuse in the plug
3.
Try a different socket
4.
If the unit has been permanently connected to a fused switch ask a
qualified electrician or competent person to check the connections.
ONE OF THE ABOVE MAY CURE YOUR FAULT, IF NOT CONTACT YOUR
DISTRIBUTOR.
