PARRY AGPC1, Инструкция по эксплуатации продукта

Страница: 6 / 17

Parry
-British Built for Purpose
IN161-3
4
Installation Instructions
ALL APPLIANCES MUST BE FITTED AND OR CONVERTED BY A REGISTERED INSTALLER, IN
ACCORDANCE WITH CURRENT REGULATIONS.
Before installation check data plate on rear of unit to ensure appliance is suitable for gas
supply available.
During installation provision must be provided for combustion air to the appliance through
base and rear of appliance. This should not be blocked at any time.
This appliance should be installed with sufficient ventilation to prevent the occurrence of
unacceptable concentrations of substances harmful to health in the room in which it is
installed.
POSITIONING
The appliance must not be installed on or against combustible surfaces – minimum clearances must
be:
REAR 150mm (6’)
SIDES 150mm (6’)
Hotplate to Combustible material 1525mm (60’)
All local fire regulations should be observed.
It is recommended that the appliance be sited below a
ventilating hood preferably of the extractor type
incorporating a grease filter.
To secure the Alpha Gas Pie Cabinet AGPC1, to a work
surface, the unit is supplied with two fixing brackets.
To secure the unit using these brackets, simply unscrew
two of the black plastic feet and thread the bracket
through the fixing and then re screw the foot back into
position sandwiching the bracket between the foot and
the unit.
The bracket has two holes in it which the installer can use to fasten to a work surface.
Please note no fixings are provided for securing the bracket. It is the responsibility of the
installer to use adequate fixings for the material that the appliance is fastened to.