PARRY 7072, Инструкция по эксплуатации продукта

Страница: 6 / 19

Parry -British Built for Purpose
IN146-9
4
Installation Instructions
ALL APPLIANCES MUST BE FITTED AND OR CONVERTED BY A REGISTERED INSTALLER, IN
ACCORDANCE WITH CURRENT REGULATIONS.
Before installation check data plate on rear of unit to ensure appliance is suitable for gas supply
available.
Appliances are supplied for use with either Natural Gas or LPG. The required gas type must be
specified at the point of order. Natural Gas appliances have an LPG conversion kit included as
standard. LPG Gas appliances have a Natural conversion kit included as standard.
Your attention is drawn to the gas safety regulations current issue and rules in force. This appliance
must only be installed and used in a well ventilated area.
This appliance MUST be installed by a competent person in accordance with these and any other
relevant regulations. Users too should be aware of the regulations governing the use of gas
appliances, particularly with respect to the need for regular servicing (recommended annually)
During installation provision must be provided for combustion air to the appliance through the right
hand side and rear of appliance. This should not be blocked at any time.
This appliance should be installed with sufficient ventilation to prevent the occurrence of
unacceptable concentrations of substances harmful to health in the room in which it is installed.
POSITIONING
The appliance must not be installed on or against combustible surfaces – minimum clearances must
be:
CEILING / SHELF 900mm
REAR 75mm
SIDES 75mm
The appliance must be fitted securely on a non-combustible shelf or surface.
Parry sells a wall shelf, bench stand and floor stand to accompany these units
It is recommended that the appliance be sited below a ventilating hood preferably of
the extractor type incorporating a grease filter.
All local fire regulations should be observed.