Parrot You Com, Руководство пользователя

Страница: 26 / 55

26 © 2007 Parrot
Select the correct sensitivity:
Use the LINE/MIC switch to select either a line
level or a microphone level input .
Use the L/M/H switch to set the right sensitivity
for the connected input signal.
(see also section 3.2)
These switches should be set in such a way that:
the top red light of the level-indication-bar will not light up on a ‘maximum
conceivable signal’ (that would indicate an overload of the pre-amplifier).
there is still a few green lights showing on a signal with a ‘normal’ level and the
level-control set to about L7.
Set the input level-control:
Press the level controller to turn on the
INPUT light.
The 2-digit display shows the current
position of that level with L0…L9
This level is adjusted each time the level
controller is turned and as long as the
INPUT light is still on.
Set the INPUT-level in such a way that only green LEDs light up on the input signal
with an occasional yellow one.
Set the input phones-control:
Do not press the level controller for a few
seconds and see that the PHONES LED is
ON (by default after a few idle seconds).
The 2-digit display shows the current
position of that level with P0...P9.
This level is adjusted each time the level
controller is turned and as long as this
PHONES light is on.