5
MAINTENANCE
• When maintaining/cleaning the shredder, switch the power off.
• Use a clean cloth, detergent and hot water.
• Do not use solvents to clean the machine casing as this will cause fading.
• Do not spill any water in the machine head as this may cause electrical shock.
• Clean out waste bin before it is full as it may cause a blockage.
After feeding the
the shredder does
not shred.
paper,
1. Is the power plug safely
and securely inserted
into the socket?
2. Does the Auto Feed
stop when feeding paper?
3. The motor has overheated, so
the protective device is
activated.
4. Is there a paper jam?
1. Re-insert the power
socket.
2. Feed a couple of pages through
the manual feeding slot and place
paper back on Auto Feed tray. *
3. Switch the machine off for 30
minutes to cool down, then try
again.
4. Adjust the switch to reverse
position to remove the jammed
paper.
plug into the
PROBLEM
CAUSE
SOLUTION
Shredder too noisy.
Shredder jams whilst
shredding.
1. Shredding capacity is
overloaded.
2. Paper is wider than the
shredder opening.
3. Paper is not placed upright.
1. Check if machine is placed
a flat, level surface.
on
1. Move shredder to a
surface.
flat, level
1. Put less paper when
2. Push REV button and remove
paper, fold it and place in
shredder again.
3. Put the paper in straight.
shredding.
1. Is the sensor (located in
centre of the paper in-throat)
covered by paper scraps or
paper dust?
the
1. Use a brush to clear
scraps or dust from the
electronic eye.
the paper
After the paper
shredding is completed,
the shredder does not
stop shredding.
BRIEF PROBLEM SHOOTING
English
* Auto Feed only works reliably with clean, uniform paper.
Содержание S801
Страница 1: ......