This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French
Société Anonyme
(Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
5008
Using a jumper or a pigtail
connection connect a wire to the
YELLOW wire on the top left.
(Opposite the connector.)
Finding an ACC wire
On the DIAG socket, unclip the
left-hand side, then push the
socket to the back and bring it out
through the top.
Insulate with electrical tape.
Push the connector back and
clip it into its housing.
Pass the wire from underneath
the steering wheel towards the
radio housing.
1
3
2
4
5
5b
For adapter 86165/9706AP (CK range): Cut
the orange wire between the fuse holder,
cut the ISO connector (supplied) and
connect the ACC wire.
For adaptor 84744/9706AT (MKi range):
disconnect the blue wire in front of the
fuse, then connect the ACC wire.