●
●
20cm
50cm
1m
1m
10
3
--Do not cover the vent of the projector. Poor radiation
may shorten the service life or even cause dangers.
--Remove the AC power plug if the projector is not to be
used for a long time.
--Do not project the same image for a long time; otherwise,
a residual image may appear on the LCD panel due to its
characteristic.
Caution
Do not set the projector in greasy, wet, or smoky
conditions such as in a kitchen, to prevent a malfunction or
accident. If the projector comes in contact with oil or
chemicals, it may become deteriorated.
Read and keep this manual for future reference.
The projector must be grounded.
Do not expose the projector to raindrops or high
humidity to avoid a fire or electric shock.
-- This projector produces intense light from the projection
lens. Avoid staring directly into the lens, otherwise eye
damage could be caused. Be especially careful that
children do not stare directly into the beam.
-- Place the projector in a proper position. Otherwise it
may result in fire hazard.
--Leave an appropriate space from the top, sides, and back
of the shell in order to ventilate and cool down the
projector. The figures below indicate the minimum
distance to be left. It must be satisfied if the projector is
placed in sealed environment like a cabinet.
Caution
：
Please read this manual completely before installing and
operating the projector.
The projector provides many convenient features and
functions. Proper operation may enable you to fully utilize
the features and keep it in good condition. Otherwise, it
will not only shorten the service life of the unit, but also
may cause malfunction, a fire, or other accidents.
If your projector cannot work properly, please read this
manual again, check the operating methods and cable
connection, and try the solutions in the part of
Troubleshooting. If the problem still exists, contact the
dealer or the service center.
The lamp of the projector is a wearing part. The luminance
may decrease after a period of operation and be weaker
than that of a new lamp. This is normal. Please strictly
follow the steps in Turning on the unit and Turning off the
unit to turn on/off the projector, and the requirements in
Maintaining and cleaning the projector to service and clean
the projector regularly. Or the high temperature residual
heat may not radiate, greatly shortening the service life of
the projector and lamp, or even damaging them within a
short period.
Caution
Electric shock
Do not open
Caution
: To reduce the risk of electric shock, do not
remove
the
cover
(or
back).
No
user-serviceable parts inside except lamp
replacement. Refer servicing to qualified
service personnel.
The sign indicates the danger of high voltage,
i.e., electric shock.
The sign indicates important operating and
maintenance instructions in the manual with the
unit.
Environment-friendly use conditions: The
environment-friendly life time of the
projector and remote control is 10 years, the
lamp (consumable) 5 years, and the
provided batteries (consumable) 5 years.
The
use
conditions
of
the
environment-friendly use period are the
same with that of the product. Properly
operate and effectively maintain the
projector according to the requirements in
this manual.
Safety precautions
To the owner