ENGLISH
3
The first time you switch on, you will need to pair up your phone and your Parrot CK3000.
IMPORTANT :
The CK3000 Hands-Free set operates only when ignition is switched on.
Switch on your phone; turn the key in the car ignition and two indicator lights on the buttons should come on to indicate your
hands-free is powered up. Now carry out the following sequence on your phone.
Access the Menu and scroll
to "Bluetooth", type " Select ". Find " On " to activate Bluetooth.
to " Search for audio accessories", press Select.
The display reads " Searching for devices ". Please wait.
The display reads " Parrot CK3000 ", press " Select " to make the connection.
The display reads " Enter passcode ", type 1234 then " Select".
From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle loud-speak-
ers. When you get into your vehicle and turn on the ignition, your phone will ask for autorisation to connect to Bluetooth
through the Parrot CK3000.
You can bypass this request for authorisation each time:
Go into the Menu, and access " Bluetooth " by scrolling the
or
keys.
Then,
to " View paired devices ", press Select.
" Parrot CK3000 " will be displayed, press " Options".
to " Request conn. Authorization ", enter " Select ".
For more information, consult your Nokia phone user's guide.
There are two ways of learning the names. You can allocate a voiceprint to the names in your directory either directly from
your phone or through the Hands-Free.
Vocal recognition through the phone :
This takes place from the microphone in your phone.
Consult the Nokia 6310 user guide.
Vocal recognition through the CK3000 :
Precautions to be taken while learning names :
The learning phase is important. Vocal recognition system reliability is linked to the recording quality. Following the recom-
mendations below should ensure trouble-free operation :
Speak naturally in a loud voice.
Make your recording somewhere quiet.
Turn off car radio and ventilation system.
Close car doors and windows.
To allocate a voiceprint to a name, access your directory by scrolling the
or
keys. Find the desired name and click on "
Details ", then " Options ". Find " Add voice tag " and click on " Select ".
The following message is displayed : " press Start then speak after the tone " ;
Then press " Start " and say the name.
To remove the voiceprint for any name, access your directory by scrolling through the
or
keys and click on " Details ",
then " Options ". Find " Voice tag " and click " Select ".
By clicking " Change ", you can re-record over the voiceprint.
By clicking " Erase ", you will delete the previous voiceprint recording.
PAIRING PHASE
PAIRING WITH THE NOKIA 6310
LEARNING NAMES
NOKIA
notice_eng.qxd 14/02/2002 15:39 Page 3
