F62
90
Installation & Operating Instructions for the
Parrotuncle Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
FAN INSTALLATION INSTRUCTIONS
WARNING
Make sure electricity is turned off at the main power box before commencing work. Turn off the power by removing fuse or turning off circuit breaker before installing the fan and replacing the lamps.
• The lowest point on the fan blade must be at least 2.1 metres (7 feet) from the floor.
• Make sure that ceiling joists are strong enough and of adequate size to support the weight of the fan of about 35 kg.
Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC
www.parrotuncle.com
Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.
Used under license by Eileen Grays LLC.
All rights reserved.
Made in
CHINA
Switch Housing Cap Installation
Attach the switch housing cap onto the
mounting plate, by placing the key slot holes
from the switch housing cap onto the three
protruding screw heads from the mounting
plate
.
Twist the switch housing cap clockwise
until the screw heads engage the key slots.
Install the screw removed from mounting
plate into the closed hole in the switch
housing cap.
X3
Remove the 3 screws from the
swithch housing cap
and set aside
for later use.
I
nserts the male and female wire
plug well
,shown as figure on the left.
switch housing cap
Light Kit
Installation
