F6288
Installation & Operating Instructions for the
Parrotuncle Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
5
Locate 12pcs blade attchment screws and washers in
hardware pack. Slide blade through center band and
align holes. Insert 3pcs blade screws and washers
with fingers. Tighten securely with a phillips screwdriver.
Repeat for the remaining blades.
Blade screws
and Washers
Coupler Cover
Yoke Screws
Fan Blade
Support Rod
Safety Pin
Top Plate
Center Band
Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC
www.parrotuncle.com
Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.
Used under license by Eileen Grays LLC.
All rights reserved.
Made in
CHINA
FAN INSTALLATION INSTRUCTIONS
step 1. Remove the 3 screws shown as
figure before taking down the top housing .
reverse switch
4
