WARNING
Make sure electricity is turned off at the main power box before commencing work. Turn off the power by removing fuse or turning off circuit breaker before installing the fan and replacing the lamps.
• The lowest point on the fan blade must be at least 2.1 metres (7 feet) from the floor.
• Make sure that ceiling joists are strong enough and of adequate size to support the weight of the fan of about 35 kg.
Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC
www.parrotuncle.com
Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.
Used under license by Eileen Grays LLC.
All rights reserved.
Made in
CHINA
CRYSTAL COVER
INSTALLATION
The crystal bead
s
(provided)
need the user to hang
on
the cage
.
The connecting
steel
wire on the crystal chain is inserted into the hole in the
decorative
cage
(
Fig.a
), then bent down the wire (
Fig.b
) and secured.Secure
the
steel wire
f
or
the top and bottom
.
Fig.a
Fig.b
Install the crystal cover onto the light kit and tighten the 4 screws . Place decorative
cap over the bottom of glass and secure by tightening decorative finial.
