F6236
Installation & Operating Instructions for the
Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
SKU
e
g
a
tl
o
V
d
e
t
a
R
Light CCT.
)r
o
t
o
m
(r
e
w
o
p
d
e
t
a
R
55W
THANK YOU FOR YOUR PURCHASE
instructions before using the product
1. Mounting bracket
2. Mounting screws
3. Canopy
4. Downrod & hanger ball
5. Canopy cover
6. Coupling cover
9. Top housing
10. Lower housing
11. Fan motor assembly
12. Screws for Blades
13. Blades
14. Blade bracket
18. Wood screws
19. Expansion screws
20. Screw washers
21. Balancing tape
22. Balancing clip
23. Remote control set.
BEFORE INSTALLATION
Unpack your fan and check the contents.You should have the following:
CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
1.
To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin
the fan installation or before servicing the fan or installing accessories.
2. Read all instructions and safety information carefully before installing your fan and save these instructions.
3. Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code.
If you are unfamiliar with electric wiring, please use a qualified and licensed electrician.
4. Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least
seven (7) feet of clearance between the floor and the fan blade tips. The fan should be mounted at least thirty
(30) inches from walls or other upright structures.
5.
WARNING:
The outlet box and ceiling support joist used must be securely mounted, and capable of
supporting at least 100 pounds. To reduce the risk of fire, electric shock or personal injury, mount to the outlet
box marked acceptable for fan supported and use mounting screws provided with the outlet box. The box must
be supported directly by the building structure.
6.
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked
“acceptable for fan support” and use mounting screws provided with the outlet box most outlet boxes commonly
used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult
a qualified electrician if in doubt.
7. Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and
marked suitable for use with the model fan you are installing. Switches must be UL. general use switches. Refer
to the instructions packaged with the light kits and switches for proper assembly.
8. After installation is complete, check that all connections are absolutely secure.
9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up
into outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
10. WARNING:
To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed
control device, or rheostat.
11. Do not separate the reverse switch until the fan has come to a complete stop.
12. Do not insert anything into the fan blades while they are rotating.
13.
WARNING:
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as
“flanges”) during assembly or after installation. Do not insert objects in the path of the blades.
14. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning
the fan.
15. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened
cloth will be suitable for most cleaning.
NOTE:
The important safety precautions and instructions appearing in the manual are not meant to cover all
possible conditions and situations that may occur. It must be understood that common sense and caution are
necessary factors in the installation and operation of this fan.
NOTE:
This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities are different or are impaired, or lack of experience or knowledge,
unless such persons are supervised or trained to operate the appliance by a person responsible for
their safety.
NOTE:
Children should be supervised to ensure that they do not use appliances as a toy.
BEFORE INSTALLATION
INSTALLING THE FAN
Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.
INSTALLLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are 12”( 300mm) spacing from the tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to turn
off the
power. Follow the instruction below to hang your fan properly:
NOTE:Hanger after the installation must be able to withstand the weight of 100lbs( 45kgs) or more
1. For concrete ceiling, drill two holes in
the ceiling and secure the mounting
bracket to the ceiling with two
Φ
0.32”(8mm)
（
distance between the
two holes should be appropriate
）
expansion screws, flat washers,nuts
provided and tighten with a spanner.
2. For wood ceiling, install the
mounting bracket to the ceiling which
is capable of carrying a load of at least
100lbs(45kgs) with two long mounting
screws and washers provided. Be sure
at least 0.12”(30mm) of the screw is
threaded into the support.
3. For installing to outlet box, secure the outlet box
directly to the building structure. Use appropriate
fasterners and building materials. The outlet box and its
support must be able to fully support the moving weight
of the fan(at least 100lbs). Use a UL listed metal outlet
box. Do not use a plastic outlet box. Figure 1& 2
examples to mount the outlet box.
4. Refer to the Fig. in right for mounting
when the ceiling is angled max. 15
degree angle.
E26 2*40W(MAX.)EXCLUDE
F6236BK
INSTALLATION AND FAN OPERATION.IF UNSURE CONSULT
A QUALIFIED ELECTRICIAN
18 19 20 21
22
2 4 8
hr
1
2
3
23
15. Screws for blade bracket
7. Bolt
F6236
Installation & Operating Instructions for the
Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
1.
2.
INSTALLING THE FAN TO MOUNTING BRACKET ON
CEILING
.
USING YOUR CEILING FAN
1.
2.
3.
F6236BN
55W
E26 2*40W(MAX.)EXCLUDE
8. Lock pin
16. Screws for Light kit
17. Light kit
4. Install the Light kit to the junction box with by using the 3 screws
preinstalled on the Screws for Light kit.
16
13
1
2
3
4
5
17
6
7
8
9
10
11
14
12
15
Coupling
Downrod &
hanger ball
Decorative
canopy cover
Coupling
cover
Bolt
Lock pin
Canopy
Set screw
Remove the tool Screws for Blades and Screws for blade bracket
from the screw package.
blade bracket
Mount the cutter Blade bracketmounted to the Fan
Motor Assembly.
