21
Perform keystone correction
Keystone distortion occurs where the projected image becomes trapezoidal in shape
(keystone distortion) and is a result of poor projection angle.
To correct this, you should adjust projector height and use the following steps to
correct the issue manually.
●
Using the remote control
1. Press / to display the Keystone Correction
page.
2. Press to initiate Keystone Correction at the top
of the image. Press to initiate Keystone Correction at the bottom of the image.
●
Using the OSD menu
1. Open the OSD menu and open
Display
>
Keystone
menu.
2. Press [Enter]. This will bring up the
Keystone
page.
3. Select
Vertical
and then press to initiate Keystone Correction at the top of the
image or press to initiate Keystone Correction at the bottom of the image.
Press
