[email protected] www.parmida.com
LED STRIP LIGHT DOES NOT TURN ON
1. Ensure the power supply is turned on and receiving power.
2.
Confirm you have maintained correct polarity (+ to + and - to -) when joining the LED Strip/Tape as well as when they are connected to the Drivers.
3.
Ensure that the output voltage of the Driver matches the input requirement of the LED Strip Light.
4. Check all LED connections, and ensure accessories are properly used.
ONLY PART OF THE LED STRIP LIGHT IS LIT
1. Check the connection and ensure accessories are properly used on the area of the Strip Light that is not lit up.
2.
Confirm you have maintained correct polarity (+ to + and - to -) when joining the LED Strip/Tape as well as when they are connected to the Drivers.
3.
If part of the LED Strip is accidentally damaged you may cut and remove that section and connect the remainder of the Strip Light together.
LED STRIP LIGHT IS BLINKING
1. Ensure a compatible driver is being used, a 24V driver is required.
TROUBLE SHOOTING
