Parmco PW-F8-W, Инструкция по установке и эксплуатации, Страница: 5 / 12

Knob
Drawer(for detergent
or fabric softener)
Door glass
Top cover
Control panel
Case body
Door seal
Drain hose
Adjustable feet
Drain pump filter
Lower cover
Door
Unscrew the drain pump filter to let water run out when the
machine is not used for a long time.
Connection Cable
Cold water inlet valve
Transit bolts
Back cover
The drawing of machine in the manual is only used for instruction.
It may be vary from the mode you buy.
Parts and Features Installation
Before Use Before Use
Backout packing
Remove all the packing(including the foam base)
or the vibration and noise may occur.
Dispose all the wrappage safety and keep them out
of the reach of children. Danger of suffocation!
It is normal that water drops appear on the packing
plastic bag and the door glass, which are resulted
from the water left in the tub for checking out.
Accessories
Make sure that you have received all of the items shown below.
Accessories Name
Qty.
Accessories Name
Qty.
Inlet hose
transit bolts
caps
1
4
“U” piece
1
Manual
1
Removing transit bolts
Remove all the transit bolts at the rear of the machine with tools.
Plug the holes with the transit bolts caps supplied.
Strong vibration, noise or failures may occur if
the transit bolts are not removed.
Transit bolts
Keep the transit bolts for future transportation. Whenever the machine is
transported, the transit bolts must be refitted.