Water drainage
Screw tight the tap in the
direction of screw thread
of the inlet hose.
Connect the hose to the water
inlet at the back of the washing
machine.
3
4
To avoid the damage caused by the overbending of the inlet hose .
When connecting the water hose and the water tap, do not crossthread the screw.
Please check the inlet hose conditions regularly. Please replace it in time if damaged.
When connecting the screw thread of the inlet hose and the inlet valve, do not
crossthread the screw or it may wear or leak.
The power supply cable must be easily accessible after installing the washing machine.
Electrical connection
Information on the electrical connection is given on the rating plate on the inner edge of the appliance door.
complies with the maximum load required, also taking into
consideration any other appliances in use.
Caution! Connect the machine to an earthed socket.
Caution! The manufacturer does not accept any responsibility for damage or injury through failure to
Caution! Should the appliance power supply cable need to be replaced, this MUST be carried out by an
Check that your electrical installation
comply with the above safety precaution.
The end of the drain hose can be positioned in three
ways:
3.Hooked over the edge
of a sink using the
plastic hose guide
supplied with the
machine.
In this case, make sure
the end cannot come
unhooked when the
machine is emptying.
This could be done by
attaching it to the wall or laundry tub.
Drain hose must be fixed in all positions to avoid
accidental spills.
1. In a sink drain pipe branch
.
This branch must be above the trap so that the bend
is at least 60 cm above the ground.
2.Directly into a drain pipe at a height of not less than
60 cm and not more than 90 cm. The end of the drain
hose must always be ventilated , i.e. the inside
diameter of the drain pipe must be larger than the
outside diameter of the drain hose.
The drain hose must not be kinked.
Notes:
If the machine has the plastic hose , please
install it with the following method:
authorized electrician.
20