21
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned to the right or the left to facilitate proper
installation.
Levelling the Appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the
height of the dishwasher, making it level. In any case, the appliance should not be inclined
more than 2°.
NOTE:
The maximum adjustment height of the feet is 20 mm.
How to Drain Excess Water from Hoses
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excess water from hoses into a bowl or a
suitable container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning efficiency of the dishwasher
could be reduced.
Syphon Connection
The waste connection must be at a height of between 50cm (minimum) and 100cm
(maximum) from the bottom of the dishwasher. The water drain hose should be fixed by a
hose clip.
Start of Dishwasher
The following should be checked before starting the dishwasher:
1)
Whether the dishwasher is level and fixed.
2)
Whether the inlet valve is opened.
3)
Whether there is leakage at the connections of the hoses.
4)
Whether the wires are tightly connected.
5)
Whether the power is switched on.
6)
Whether the inlet and drain hoses are knotted.
7)
All packing materials and printed materials should be removed from the dishwasher.
After installation, please place manual and other printed materials for the appliance
in a safe and accessible place.
