11
ELECTRICAL CONNECTION & SAFETY WARNING
1. Disconnect the appliance before any intervention. Disregard of this could cause electric shock and danger of
death.
2. The appliance must be installed by qualified personnel with all electrical installation requisites in compliance
with the local norms in force.
3. Make sure that the voltage of your electric network is the same voltage as indicated on the appliance rating
label.
4. The power supply cable must be long enough to allow the hob to be removed from the work surface and it
must be positioned in such a way as to prevent damage or overheating caused by contact with parts or
appliances underneath.
5. Grounding of the appliance is compulsory, for this reason all electrical wires and grounding must have a
suitable section. Ensure that grounding is efficient.
6. A multiple switch with 3mm contact separation or more must be foreseen when installing the hob.
7. No responsibility is accepted for damage to things or injury to persons if these result from non-observance of
these requisites.
Electrical connection
1. If the appliance has a provided power supply cable, it can be used directly. Otherwise, the proper power
supply cable it can choose included:H05VV-F,H05RN-F,H05RR-F or 5 core cable with grounding. The
diameter of the cable must be at least 1.5mm².
2. Make sure that the switch is off before wiring.
3. Install the power cord to the switch with a screwdriver according to the wiring diagram, as shown in the pic
below.
Pots and pans and how to use them
The pots and pans that can be used on this hob must be made of ferromagnetic material. They can be made
of enameled steel, cast iron or special pans of stainless steel for induction. The diameter of the pan should
be at least 11cm.
To make sure a pan is suitable, try using a magnet to see if it sticks to the bottom of the pan. Never use
normal thin steel nor anything containing even just an amount of glass, terracotta, copper or aluminium.
