PARKZONE RTF P-51 MUSTANG BL Скачать руководство пользователя страница 9

16

17

1.  Don’t fly in winds over 10 mph! If you are a less 

experienced pilot, this is especially important.

2.  A pilot who has never flown a 3-channel plane with 

pitch control should get help from an experienced 

radio control pilot during first flights. Pilots who 

have not flown a 3-channel plane at all should not 

fly unless an experienced RC pilot is present to 

guide them.

3.  Choose your flying field carefully—grass and soft 

ground with a 600-foot (183-meter) diameter of 

open space is optimal for flying and will lengthen 

the life of your airplane. Make sure there are no 

obstacles that will get in your way when flying, 

such as trees or buildings. Make sure you do not 

fly where there are pedestrians who could be hurt 

by the airplane.

4.  Remember that holding the stick full over for too 

long can cause the airplane to spiral dive and 

crash. At the very first sign of the plane beginning 

to spiral down, immediately release the stick and 

give the opposite turn control to the spiral, then 

pull back on the elevator gently to level flight and 

level the wings.

Repairing Minor Damage

ParkZone 18-Amp ESC

Success Tips

5.  Don’t attempt to fly or do maneuvers beyond your 

flying abilities. Seek the assistance of an experi-

enced pilot when trying new maneuvers that are 

more extreme and involve fast flight.

6.  If you’re gliding with the motor off, allow your plane 

more area for turns.

7.  Position yourself at your flying field so that you 

keep the sun at your back and out of your eyes. 

Wear sunglasses on bright days.

8.   Keep the aircraft upwind, especially on windier 

days, to prevent it from “flying away.” The wind is 

normally stronger at higher altitudes than it is on 

the ground.

9.  Keep your plane in front of you so you don’t have 

to turn in circles as you fly. Try to avoid flying  

directly overhead.

If you happen to crash, and part of the fueslage or wing 
breaks, you can repair the damage by using regular 
medium CA glue to glue the pieces back on, or packing 
tape to cover the missing pieces. However, if the  
damage is severe, or if the wings and/or tail,are bent, 
replace the damaged parts prior to flying again. See the 
last few pages of the manual for a complete list of  
replacement parts for your P-51D Mustang.

Note: 

Horizontal stabilizer is not compatible with 

regular CA. Use foam-safe CA or replace stabilizer 

if damaged.

Specifications

Continuous Current: 18A*

Max Burst Current: 25A (15 sec)*

Length: 47.0mm 

Width: 27.5mm

Height: 8.5mm

Weight: 31.0 g

Cells: 2-3S LiPo or 6-12 NiMH/NiCd

Battery Input Leads: 16AWG with E-flite

EC3 Connector

Motor Output Leads: 16AWG with 3.5mm Female
Gold Bullet Connectors

 

 

 

 

* Proper cooling required

Default Settings

9V Cutoff

No Brake

Motor Timing: 15 Degrees

Throttle Input: 1.2–1.8ms

Optional RS232 Serial Link & Programming Software

Programming your ESC will be much faster and easier 
when you purchase the optional RS232 Serial Link and 
programming software. This will allow you to update your 
ESC using a laptop or PC. You must have a Serial Port 
on your computer or you can purchase a separate USB 
to DB9 adapter (available at computer retailers).

EFLARS232—RS232 Serial Link/Programming Software

For specific ESC programming instructions please refer 
to horizonhobby.com

Replacement Parts

Optional Parts

PKZ1019  Propeller 9 x 6
PKZ1020  Prop Adapter
PKZ1033   11.1V 1300mAh Li-Po Battery 

with EC3 Connector

PKZ1081  SV80 Long Lead 3-Wire Servo
PKZ1771  Tx: CH 1, 26.99 
PKZ1772  Tx: CH 2, 27.04 
PKZ1773  Tx: CH 3, 27.09
PKZ1774  Tx: CH 4, 27.14 
PKZ1775  Tx: CH 5, 27.19 
PKZ1776  Tx: CH 6, 27.25 
PKZ1802  Decal Sheet          
PKZ1807  Spinner               
PKZ1813  Clear Canopy and Painted Hatch 
PKZ1814  18A Brushless ESC                     
PKZ1820  Bare Wing (Painted, No Decals or Servos) 
PKZ1822  Pushrods with Clevis   
PKZ1823  Control Horn set  
PKZ1824  Horizontal Stabilizer with Accessories  
PKZ1825  Motor Mount
PKZ1826  Cowl with Exhaust        
PKZ1867  Bare Fuselage (Painted, No Decals)
PKZ1870  Replacement Airframe  
PKZ4416  480 Brushless Outrunner Motor, 960Kv
PKZ4418  Motor shaft: 480 Outrunner
PKZ4551  Rx: CH 1, 26.99
PKZ4552  Rx: CH 2, 27.04
PKZ4553  Rx: CH 3, 27.09
PKZ4554  Rx: CH 4, 27.14 
PKZ4555  Rx: CH 5, 27.19 
PKZ4556  Rx: CH 6, 27.25 
HBZ1003  DC Li-Po Balancing Charger

HBZ1004  1.5A AC Power Supply

Содержание RTF P-51 MUSTANG BL













Отзывы: