28
© 2014 - 2024 Parktron Technology Ltd.
Content of “
HostSeting.sh
”:
Universal spare IP address:
The IP address in the first line 192.168.1.234 (Do NOT
change this one).
Configured IP address
: 192.168.0. X (If needed, X is the number to configure); after
changing the default IP address of terminal, please make sure it is matching the IP
address configured in IPMS2000 server program (Under [Config] -> [Device] -> and
select the terminal item).
3.4. Specify terminal program for entry or exit:
Under
LocalSeting
file directory, the filename “
location.in
” makes the terminal program
to run in entry mode. When rename to “
location.out
”, it makes the terminal program to
run in exit mode.
Use command like “
mv location.in location.out
” to rename “location.in” to “location.out”.
3.5. Time synchronization:
Under
LocalSeting
file directory, use “
vi
” to edit file
TimeSync.sh
.
Make sure time server’s IP address in the red circle (Normally same as the server IP
address: 192.168.0.80).
Universal spare IP (do not change)
Terminal IP address to configure
