10
GB
IE
NI
in the attachment tool must fit
the mounting diameter of the
flange.
Attachment tools which cannot
be precisely attached to the electric tool
turn unevenly, vibrate very strongly and
can ultimately lead to a loss of control.
• Never use damaged attachment
tools. Check attachment tools
such as grinding discs for chip-
ping or cracks, grinding plates
for cracks, wear or strong abra-
sion and wire brushes for loose
or broken wires before using
them. If the electric tool or the
attachment tool falls off, check
whether it is damaged or, use
an undamaged attachment tool.
If you have checked the attach-
ment tool and attached it, keep
yourself and any nearby persons
beyond the level of the rotating
attachment tool and allow the de-
vice to run for 1 min. at the high-
est rotational speed.
Damaged tools
usually break during this test period.
• Wear personal safety equip
-
ment. Depending on the appli-
cation, use full face shields, eye
protection or safety goggles. In
so far as it is appropriate, wear
dust masks, ear protection,
gloves or special aprons which
keep small grinding and materi-
al particles away from you.
Eyes
should be protected from the foreign
matter which can be caused to fly du
-
ring the various applications. Dust or
breathing masks should filter the dust
that is created during operation. If you
are exposed to loud noise for a long
time, you may suffer hearing loss.
• Ensure that other people are at
a safe distance to your working
area. Anyone who enters the
working area should wear per-
sonal protective equipment.
Bro-
ken bits from the piece being worked or
broken attachment tools can fly away
and cause injuries even beyond the di-
rect working area.
• Hold the electric tool only by the
insulated gripping surfaces when
performing work in which the
cutting tool may come into contact
with hidden wiring or its own
cord.
Contact with a live wire can also
cause a charge in metal parts of the
device and result in an electric shock.
• Keep the cord away from the ro-
tating attachment tool.
If you lose
control of the device, the power cord
can become separated or caught and
your hand or arm may be pulled into
the rotating attachment tool.
• Never put the electric tool down
before the attachment tool has
come to a full stop.
The rotating at-
tachment tool can come into contact with
the surface upon which it is set, whereby
you could lose control of the electric tool.
• Never allow the electric tool to
run while you are carrying it.
Your clothing may accidentally come
into contact with the rotating attachment
tool and get caught and the attachment
tool could drill into your body.
• Clean the ventilation slots of
your electric tool routinely.
The
motor air pulls dust into the housing
and, should too much metallic dust coll-
ect, could cause electrical hazards.
• Never use the electric tool near
flammable material.
Sparks could
ignite this material.
• Do not use attachment tools
which require liquid coolant.
Using water or another liquid coolant
could lead to electrical shock.
Содержание PWS 125 C3
Страница 3: ...1 2 3 4 8 9 7 5 6 11 12 13 14 19 18 17 22 21 20 15 16 25 24 23 10 3...
Страница 45: ...45...
Страница 46: ...46...
Страница 48: ...48 2016 07 20 rev02 TR...