Parkside PWBS 180 B3, Перевод оригинальной инструкции

Страница: 13 / 53

PWBS 180 B3
GB
│
IE
│
NI
│
CY
│ 9 ■
Fitting/changing accessory tools
(Fig. A)
WARNING!
► Press the spindle locking button only
when the grinding spindle is at a standstill.
Otherwise the appliance may be damaged.
NOTE
■ The carbide grinding head is suitable for
removing formwork transitions on exposed
concrete, residual concrete on formwork
boards or adhesive residues on tiles.
■ Only use carbide sanding
heads with an even sanding
surface.
♦ Clean the sanding spindle and all parts to
be mounted.
♦ Press the spindle locking button to clamp
and release the accessory tool.
♦ To fit the accessory tool, place the mounting
flange onto the sanding spindle .
♦ Place the desired accessory tool onto the
sanding spindle .
♦ Screw the clamping nut and tighten it with
the two-hole assembly spanner .
NOTE
► Make sure that the collar of the clamping
nut is facing outwards.
12
≤ 3,2 mm
Installing the dust extraction system
Dust from materials such as lead-based paints,
some types of wood, minerals and metal can be
harmful to health. Touching or inhaling the dusts
may cause allergic reactions and/or respiratory
illnesses of the user or people in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, especially in combination with
wood treatment additives (chromate, wood preserv-
atives). Materials containing asbestos may only be
worked on by specialists.
■ Always use dust extraction.
■ Operate the power tool either with the dust
bag or connect an approved dust and chip
extraction device.
■ Ensure that your workplace is adequately
ventilated.
■ We recommend you wear a respirator with
a class P2 filter.
■ Avoid kinking the suction hose .
Observe the applicable regulations in your country
regarding the materials to be worked.
♦ Plug the inlet side of the suction hose onto
the extraction nozzle .
♦ Pull the mouthpiece
19a off the suction hose .
Open the zip on the dust bag
18a
. Now plug
the outlet end of the suction hose into the
corresponding opening on the dust bag .
Reconnect the mouthpiece
19a to the suction
hose from the inside. Close the zip on the
dust bag
18a
.
♦ Proceed in the reverse order to dismantle the
suction hose .