Parkside PVA 20-Li A1, Перевод оригинальной инструкции, Страница: 39 / 55

PVA 20-Li A1
GB
│
MT
│ 35 ■
Before use
Charging the battery pack
(see fig . A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect
the battery pack to the high-speed charger
.
■ Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
♦ Insert the battery pack into the high-speed
charger .
♦ Insert the mains plug into the mains socket .
The control LED lights up red .
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready for use .
CAUTION!
♦ If the red control LED flashes, this
means that the battery pack has over-
heated and cannot be charged .
♦ If the red and green control LEDs
both flash, this means that the battery pack
is defective .
♦ Push the battery pack into the appliance .
Inserting/removing the battery pack
Inserting the battery pack
♦ Click the battery pack into the battery
slot .
Removing the battery pack
♦ Press the release button and remove the
battery pack .
Checking the battery charge level
♦ To check the battery status, press the battery
charge level button
. The status/
remaining charge will be shown on the battery
display LED
as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Operation
Switching on/off
Switching on in 1st gear at 1400 rpm
♦ Push the ON/OFF switch into position I .
Switching on in 2nd gear at 2100 rpm
♦ Push the ON/OFF switch into position II .
Switching off
♦ Reset the ON/OFF switch into position 0 .
Adjusting the fan head
♦ Turn the fan head to the desired position .
There are 8 setting options available for this
purpose .
Carrying handle
♦ Carry the appliance by the carrying handle .
Fastening hook
♦ Fold the hook out of the stand so that you
can secure it in a suitable place, such as
attaching a wall hook .