Parkside PUV 2000 C2, Перевод оригинальной инструкции

Страница: 20 / 156

20
GB MT
Electrical safety
Caution: This is how to avoid
accidents and injuries by an
electric shock:
• Make sure that the mains volt
-
age matches the details on the
type plate.
• Connect the device only to a
socket with a residual current
circuit breaker (RCD) with a trip
-
ping current of not more than
30 mA.
• Keep the appliance away from
rainy or wet conditions.
• Do not use the mains cable to
pull the plug from the socket.
Protect the mains cable from
heat, oil and sharp edges.
• Switch the device off and pull
the mains plug out of the socket
if the mains cable is damaged.
If the connection cable of this
device is damaged, it must be
replaced by the manufacturer
or their customer service or by
a similarly qualified person in
order to avoid hazards.
• Do not connect a damaged
mains cable to the power sup-
ply. Do not touch a damaged
mains cable as long as it is
connected to the power supply.
A damaged mains cable can
result in voltage-carrying parts
being touched.
Additional safety
information
Caution! Avoid injury, fire
and health risks:
• If in danger, immediately re
-
move the mains plug from the
socket.
• Never use the device as a hair
dryer
• Never direct the hot air flow at
people or animals.
• Do not look directly into the
nozzle opening on the blow-off
pipe.
• Do not touch the nozzle when it
is hot.
• Wear safety gloves.
• Wear safety goggles.
• Remove the mains plug from the
socket when not in use as well
as when taking a break from
working or while carrying out
work on the device, e.g. chang-
ing the nozzle.
• Maintain distance between the
nozzle outlet and the surface or
workpiece you are working on.
The device could overheat.
• The device must always be kept
clean, dry and free of oil or lu-
bricating greases.