Parkside PTSS 1200 C2, Оригинальное руководство пользователя

Страница: 6 / 132

PTSS 1200 C2 GB
│
IE
│
3 ■
Technical specifications
Rated voltage 230 V ∼, 50 Hz (AC)
Rated power consumption 1200 W
Rated idle speed
n
0
5200 rpm
Saw blade holder Ø 20 mm
165mm
Saw blade
diameter
Ø 165 mm
Blade thickness 1.5 mm
Tooth size 2.6 mm
max. 6 5 mm
Max.
cutting depth
56 mm at a 90°
mitre angle
42 mm at a 45°
mitre angle
5 mm less when using
guide rails
Protection class II /
(double insulation)
Accessories 2 x guide rails
700 mm x 180 mm
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
PA
= 89 dB (A)
Uncertainty K
PA
= 3 dB
Sound power level L
WA
= 100 dB (A)
Uncertainty K
WA
= 3 dB
Wear ear muffs!
Total vibration value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Sawing wood
a
h,W
= 1.3 m/s
2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration emission value and noise emis-
sion levels specified in these instructions have
been measured in accordance with the stand-
ardised testing procedure specified and can
be used to make equipment comparisons. The
specified vibration emission value and the
noise emission values can also be used to
make an initial load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used and, in particular,
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate and may sometimes exceed the
values given in these instructions. Regular use
of the power tool in this way may cause the
user to underestimate the vibration. Try to
keep the vibration loads as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).