Parkside PTBM 500 A1 Скачать руководство пользователя страница 33

33

GB

Guarantee Cover

The equipment has been carefully pro-

duced in accordance with strict quality 

guidelines and conscientiously checked 

prior to delivery.

The guarantee applies for all material and 

manufacturing defects. This guarantee 

does not extend to cover product parts that 

are subject to normal wear and may there-

fore be considered as wearing parts (e.g. 

filters or attachments) or to cover damage 

to breakable parts (e.g. switches, batteries, 

or parts made of glass).

This guarantee shall be invalid if the prod-

uct has been damaged, used incorrectly or 

not maintained. Precise adherence to all of 

the instructions specified in the operating 

manual is required for proper use of the 

product. Intended uses and actions against 

which the operating manual advises or 

warns must be categorically avoided.

The product is designed only for private 

and not commercial use. The guarantee 

will be invalidated in case of misuse or 

improper handling, use of force, or inter-

ventions not undertaken by our authorised 

service branch.

Processing in Case of Guarantee

To ensure efficient handling of your query, 

please follow the directions below:

•  Please have the receipt and item num-

ber (IAN 102855) ready as proof of 

purchase for all enquiries.

•  Please find the item number on the rat

-

ing plate.

•  Should functional errors or other de-

fects occur, please initially contact the 

service department specified below by 

telephone

 or by 

e-mail

. You will then 

receive further information on the pro-

cessing of your complaint.

Guarantee

Dear Customer,

This equipment is provided with a 3-year 

guarantee from the date of purchase.

In case of defects, you have statutory rights 

against the seller of the product. These 

statutory rights are not restricted by our 

guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the 

date of purchase. Please retain the original 

receipt. This document is required as proof 

of purchase.

If a material or manufacturing defect 

occurs within three years of the date of 

purchase of this product, we will repair or 

replace – at our choice – the product for 

you free of charge. This guarantee requires 

the defective equipment and proof of pur-

chase to be presented within the three-year 

period with a brief written description of 

what constitutes the defect and when it oc-

curred.

If the defect is covered by our guarantee, 

you will receive either the repaired product 

or a new product. No new guarantee pe-

riod begins on repair or replacement of the 

product.

Guarantee Period and Statutory 

Claims for Defects

The guarantee period is not extended by 

the guarantee service. This also applies for 

replaced or repaired parts. Any damages 

and defects already present at the time of 

purchase must be reported immediately af-

ter unpacking. Repairs arising after expiry 

of the guarantee period are chargeable.

Содержание PTBM 500 A1







































Отзывы: