Parkside PSTK 730 A1 Скачать руководство пользователя страница 10

Страница: 10 / 66

10 GB/CY

draw the saw blade

from the cut until after

it has come to a standstill.

After switching off do not brake the saw blade

by pressing it sideways against an object.

It could cause the saw blade

to be dam-

aged, break or initiate a kickback.

Use only undamaged, defect-free saw blades.

Distorted or blunt saw blades can break or
cause a kickback.

Always keep the device clean, dry and free of

oil or grease.

Original accessories /

attachments

Use only the accessories and attach-
ments detailed in the operating instruc-
tions.

The use of inserted tools or accessories

other than those recommended in the operating
instructions could lead to you suffering an injury.

Preparing for use

Information about saw blades

The Parkside equipment supplied as standard with
your tool includes saw blades intended mainly for
sawing wood and metal.

1 blade (wood) for quick cutting

in softwood (green arrow marking)

1 blade (wood) for clean

cutting in softwood (orange arrow marking)

1 blade (special) for metal up to 3 mm thick

(black arrow marking)

Note:

Use a suitable coolant, e.g. cutting oil. This

improves the endurance and increases the service
life of the metal saw blade.

Saw blades are available which have been opti-
mally designed for particular tasks. You can use
any of these saw blades provided they have the
correct shank fitting (single lug shank).

Mounting / replacing

saw blades

Saw blade type

Suitable for
PSTK 730 A1

Unsuitable

WArNING!

Pull the mains plug out of the

socket before you carry out any task on the
device, otherwise there may be risk of injury.

Turn the quick-release chuck

and hold it in

the turned position.

Press the selected saw blade

up to the stop

in the quick-release chuck

The saw blade

should then engage.

The saw blade

must lie in the guide roller

Release the quick-release chuck

. The chuck

must then return to its original position.
The saw blade

is then locked in place.

Attaching the chip guard

Pull the runner

off the base plate

Insert the chip guard

from below into the

base plate

and slide it into the slots provid-

ed. The chip guard can help prevent breaking
out of the surface.

General safety advice for electrical power tools / Preparing for use

Содержание PSTK 730 A1



































































Результаты поиска

Содержание PSTK 730 A1

Отзывы:

Бренды по названию

Популярные бренды

Parkside PSTK 730 A1, Перевод оригинального руководства по эксплуатации и технике безопасности

Результаты поиска

Содержание PSTK 730 A1

Отзывы:

Бренды по названию

Популярные бренды