Parkside PSSAP 20-Li B2, Перевод оригинальной инструкции по эксплуатации и безопасности

Страница: 75 / 101

74 GB/MT
¾
Connect the power cord with power plug 15
of the charger 14 to the socket .
¾
When the battery pack 8 is fully charged:
Remove the battery pack from the charger
14 . Then disconnect the power cord with
power plug 15 of the charger from the
socket .
˜
Adjusting the base plate
(Fig . E)
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the
product cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
u
Remove the saw blade from the product
before adjusting the base plate 4 (see
“Inserting/removing the saw blade”) .
u
Do not use the product without having
inserted the base plate 4 .
To adapt to the workpiece, the base plate 4 can
be adjusted and swivelled to different positions .
¾
Unlock the base plate 4 : Turn the locking
lever 1 in a counter-clockwise direction .
¾
Adjust the desired position of the base plate
4 by pushing it in or pulling it out .
¾
Lock the base plate 4 : Turn the locking
lever 1 in a clockwise direction .
˜
Inserting/removing the saw
blade
m
WARNING!
Always switch the product off, remove
the battery pack 8 and let the
product cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
u
Do not use any blunt, bent or damaged
saw blade .
u
Always install a suitable saw blade for
the job .
Inserting the saw blade
(Fig . F)
¾
Turn the chuck ring 2 in a counter-clockwise
direction .
¾
Insert the saw blade into the saw blade
holder 3 .
¾
Release the chuck ring 2 and let it return to
its original position .
¾
Before use: Pull on the saw blade and check
if it is inserted safely and tightly .