Parkside PSBM 750 B2, Перевод оригинальной инструкции

Страница: 9 / 34

PSBM 750 B2 ■ 6 │
GB
│
IE
│
NI
│
CY
WARNING!
► The power tool creates an electromagnetic
field during operation . This field can, in cer-
tain circumstances, impair active or passive
medical implants . To reduce the risk of fatal
injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine .
Original accessories/auxiliary
equipment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance .
Use
WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance .
Additional handle
NOTE
► For safety reasons, you should only use this
appliance with the additional handle
attached .
♦ Loosen the strap on the additional handle by
turning it clockwise .
♦ Push the additional handle in the direction of
the quick release chuck .
♦ Turn the additional handle to the required
position .
♦ The locking positions on the additional handle
must now be pushed over the locking pin on
the spindle of the appliance .
♦ Turn the additional handle anticlockwise
again to tighten it .
NOTE
► Move the additional handle into the
various locking positions depending on your
working position . Undo and lock the addition-
al handle as described previously .
Depth stop
♦ Push the locking button for the depth stop
and keep it pushed in .
♦ Insert the depth stop into the additional
handle .
♦ Make sure that the teeth on the depth stop
point upwards and downwards .
♦ Pull the depth stop out until the distance
between the tip of the drill and the tip of the
depth stop corresponds with the required drill-
ing depth .
♦ Release the locking button for the depth stop
to lock the depth stop .
Changing tools
The appliance has a manual spindle lock .
♦ Once the motor has come to a standstill, press
and hold the spindle lock button .
♦ Turn the quick-release chuck towards
RELEASE
to open it .
♦ Insert the desired tool into the quick-release
chuck .
♦ Turn the quick-release chuck towards
GRIP
to tighten the tool .
♦ Release the spindle lock .
Operation
Select operating mode
Function selector switch:
♦ Push the function selector switch so that it
engages at the required symbol:
Function Symbol
Drilling
Impact drilling
IB_304996_PSBM750B2_LB6-.indb 6 09.07.18 17:17