background image

8  GB/IE

Safety

 

Safety

   Safety advice relating  

specifically to this device

J

 

   Keep children away from the device. 

Store the device indoors in an en-
closed, dry place where it cannot 

 

be reached by children.

   

 

To avoid danger to life from 
electric shock:

J

 

   Frequently check the condition of the 

device, mains lead and plug. Do not 
use the device if these kinds of parts 

 

 are damaged. Never open up the device. Always 
have any repairs carried out or replacement 
parts fitted at the service centre or by an elec-
trical equipment repair specialist. A damaged 
device, mains lead or plug presents a serious 
danger to life from electric shock.

J

   Have repairs carried out only by an electrician 

or your service centre.

J

   Do not touch the mains lead if it becomes  

damaged or cut through while you are using 
the device. Pull the plug out of the mains socket 
immediately and have the device repaired by 
a suitably qualified person or at your service 
centre.

J

 

   Do not operate the device if it is 

damp and do not use it in a damp 
environment.

J

   If you use the device outdoors, always connect 

it through a residual current device (RCD) with 
a maximum trip current of 30 mA. If using an 
extension lead, always use one that is ap-
proved for outdoor use.

J

   Do not use the device in rain or in wet conditions.

J   

Do not work in areas where there may be 
hidden electricity cables or gas or water pipes.
Use a suitable detector or ask your local utility 
service providers. Contact with electricity cables 
can lead to fire or electric shock. Damaging a 
gas pipe can lead to an explosion. Penetration 

of a water pipe can lead to property damage 
or to electric shock.

 

 Attention! To avoid the risk  
of injury:

J

 

   Wear protective glasses, hearing 

protection (noise can lead to hearing 
loss), dust protection mask and 

 

 protective gloves. Please note that working on 
stone or metal can give rise to hazardous dusts 
that can adversely affect your health.

J   

Be particularly careful when screwing in longer 
screws - the driver could slip off the screw head.

J   

Use the auxiliary handle supplied with the device. 
Loss of control of the tool can lead to injury.

J

   

Securely support the workpiece. Use clamps or 
a vice to grip the workpiece firmly. This is much 
safer than holding it in your hand and it means 
you then have both hands free to operate the 
electrical power tool.

  Working safely!

J

   If a dangerous situation arises, pull the mains 

plug immediately out of the mains socket.

J

   Never use the device for a purpose for which it 

was not intended.

J

   Before you insert the mains plug into the socket, 

always check that the device is switched off.

J

  Always keep proper footing and balance.

J

   When taking a break from your work, before 

carrying out any tasks on the device itself and 
when you are not using the device, always pull 
the mains plug out of the mains socket.

J

   Handle the device carefully and treat it with  

respect. Always keep the device clean, dry 
and free of oil or grease.

J

   Remain alert at all times! Always watch what 

you are doing and proceed with caution.

J

   Do not use the device if you cannot concen-

trate or you are feeling unwell.

Содержание PSBM 1100











Отзывы: