Parkside PSBM 1100 B1, Перевод оригинальной инструкции

Страница: 5 / 28

PSBM 1100 B1 ■ 2 │
GB
│
IE
│
NI
2-SPEED HAMMER DRILL
PSBM 1100 B1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is suitable for:
▯ Impact-drilling into brickwork, concrete and
stone
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance is
not intended for commercial use.
Depicted components
Quick-release chuck
Teeth on the depth stop
Screw for the depth stop
Depth stop (not prefitted)
Function selector switch
Speed preselector wheel
Rotation direction switch
Locking button for ON/OFF switch
ON/OFF switch
Speed selector
Additional handle
Package contents
1 2-speed hammer drill
1 additional handle
1 quick-release chuck
1 depth stop
1 carrying case
1 set of operating instructions
Technical data
Rated power consumption 1100 W
Rated voltage 230 V ∼, 50 Hz
(AC)
Gearbox 2-speed gearbox
Rated idle speed – 1st gear n
0
0–900 rpm
Rated idle speed – 2nd gear n
0
0–3200 rpm
Stroke rate – 1st gear 0–15300 rpm
Stroke rate – 2nd gear 0–54400 rpm
Max. torque 18 Nm
Chuck capacity max. Ø 13 mm
Max. drill diameter 13 mm for steel
40 mm for wood
16 mm for concrete
Protection class II / (double
insulation)