Parkside PNTS 1300 D3, Перевод оригинальной инструкции, Страница: 21 / 100

2 1
G B I E
Assembly
Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
16
1. Attach the carrying handle
2
screws (2a) supplied.
2. Attach the feet (7) and secure the
feet using the cross-head screws
(7a) supplied.
( 15),
16) for dry
vacuuming,
17).
Never vacuum ithout a lter
4. Place the motor housing (1) on
top of the dirt collector (6) and
close it with the clips (8).
5. Connect the vacuum hose (13)
-
sories.
Operation
Fully unwind the suction hose (
13) before commencing work.
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On/off switch ( 3) in position “I”.
Switching off the vacuum:
On/off switch ( 3) in position “O”.
Nozzle usage
Floor nozzle ( 18) with insert at-
tachment ( 19):
for wet and dry vacuuming of smooth sur-
Floor nozzle ( 18) without insert
attachment ( 19):
and for removing persistent dirt.
• Press the clips on the right and left side
18) and remove
the insert attachment ( 19).
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle ( 20):
for vacuuming gaps, corners and radiators.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
15
basket (21).
15
- Before inserting, twist the edge of
2. Suctioning up (draining) water: place
the suction hose ( 13) on the handle
( 14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
signed to store liquids (see “Cleaning/
Maintenance”).
Never reach into the water to
be suctioned up. Danger of
electric shock.