26
PMST 100 A1
GB
MODELLING JIGSAW
PMST 100 A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. The operating instructions
are part of this product. They contain important
information on safety, usage and disposal. Before
using the product, familiarise yourself with all hand-
ling and safety guidelines. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner(s).
Intended use
This appliance is suitable for straight and curved
cutting as well as mitre cuts of up to 45° on an-
gular workpieces made of plastic and wood. This
appliance is exclusively intended for private use in
dry indoor spaces. Observe the guidelines on saw
blade types. Any other usage of or modification to
the appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer ac-
cepts no responsibility for damage(s) attributable
to misuse.
Features
Speed control knob
On/Off switch
Hanger
Power cord
Scale
Baseplate
Rip fence
Saw blade
Insertion openings (each incl. locking screw)
Guide roller
Piston with saw blade holder
Locking screw (clamp)
Locking screw (base plate)
Hex key (small)
Hex key (large)
Metal housing
Insulated gripping surface
Package contents
1 modelling jigsaw
1 rip fence
2 wood sawblades
1 Hex key for saw blade changing
1 Hex key for adjusting base plate
1 set of operating instructions
Technical data
Jigsaw: PMST 100 A1
Rated voltage:
230 V ∼ 50 Hz
Rated input:
75 W (*S2 - 10 min)
No-load stroke rate
(continuously variable] 1000–4500 min
-1
Cutting depth:
Wood up to 12 mm
Plastic up to 5 mm
Diagonal cuts:
0–45° left/right
Length:
230
mm
Weight:
approx. 900 g
Protection class:
II /
*Short-term operation S2 with a constant loading
duration of 10 minutes. Afterwards, you must take
a break until the appliance temperature is within
2°C of room temperature.
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
PA
= 78 dB (A)
Sound power level:
L
WA
= 89 dB (A)
Uncertainty: K
=
3
dB
(A)
Wear ear protection!
Weighted acceleration, typically:
(Cutting boards)
Hand/arm vibration a
h,B
= 8.6 m/s
2
Uncertainty K = 1.5 m/s
2
Содержание PMST 100 A1
Страница 3: ......