Parkside PMSA 12 B2, Перевод оригинальной инструкции

Страница: 27 / 104

PMSA 12 B2 ■ 22
│
GB
│
IE
♦ Proceed in reverse order to fit a new cutting
disc. Make sure that the ground side of the
cutting disc is facing outwards.
WARNING!
► If there is a direction of rotation arrow on
the cutting disc, it must match the direction of
rotation arrow on the appliance.
► Do not tighten the clamping screw too
tightly. The cutting disc could break.
Operation
WARNING! RISK OF INJURY
► Note that the cutting disc runs on for a little
while.
Switching on and off
Switching on:
♦ Slide the On/Off switch to position 1.
Switching off:
♦ Slide the On/Off switch to position 0.
Battery charge level
♦ The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Handling the appliance
♦ Move the appliance forward slowly and without
exerting too much pressure.
♦ Make sure that the cutting disc does not come
to a standstill.
♦ Keep thin materials, such as fabric, under
tension while working them.
Cutting line marking
♦ Draw the desired pattern in advance on the
material you are working.
♦ Use the cutting line marking to orient your-
self on the previously marked pattern.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch off the appliance and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a dry cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
■ Always keep the area around the blade guard
clean. Remove dust and chips by blowing them
out with compressed air or with a brush.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as batter-
ies, battery charger) can be ordered via our
service hotline.
Disposal
The packaging is made from environmen-
tally friendly material and can be
disposed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Do not dispose of batteries in your
normal household waste!